News Center
Get the latest news about Konger, including new product launches, industry exhibitions, technical updates and market trends of the injection molding industry.
Complete Guide to Causes and Solutions for White Spots (Unmelted Particles) at Injection Molding Gates
In injection molding production, the appearance of unmelted resin particles (white spots) near the gate is a frequent defect that seriously...。
Guide to Solving Burn Defects in Injection Molded Products | Konger Helps Enterprises Reduce Rejection Rate
It not only severely impairs the product s aesthetic quality and structural performance but also leads to higher rejection rates, raw material wast.
Cracking, Partial Fracture and Easy Breakage on Plastic Product Surfaces Detailed Cause Analysis + Improvement Solutions
I,Detailed Cause Analysis 1.
Causes and Solutions for Bubble Defects in Injection Molded Products
It aims to provide customers with professional and practical guidance on troubleshooting and resolving bubble defects in injection molded products.
Cause Analysis and Solutions for Discoloration, Scorching and Raw Material Degradation of Products in Injection Molding Process
The core causes and practical countermeasures are summarized below to help troubleshoot and solve problems quic ly,Main Causes A.
Cause Analysis and Improvement Measures for Torsion and Twisting Deformation of Products During Injection Molding
During the enterprise injection molding production process, torsion or twisting of products after ejection is a common quality defect of pl...。
Summary of Causes and Practical Solutions for Flash (Burr/Excess Material) on Injection Molded Products
Flash (also nown as burr or excess material) is one of the common surface defects in injection molding production. Its main cause is: molten plast...。
Causes and On-Site Solutions for Ejector Whitening (Ejector Pin Whitening) in Injection Moldin
During injection molding production, ejector whitening (also nown as ejector pin whitening mar ) is a common surface defect. It appears as whitish...。
Domain Name Consolidation Notice
Dear Customers, Partners, and Friends from All Circles, To further optimize our brand image, unify service access points, and enhance user experien...。
Still Scrolling Through Parameter Tables to Choose an Injection Molding Machine? Keep This Tutorial on the Ningbo Konger Machinery Official Website Machine Selection Function
This video is the exclusive usage guide for the machine selection function on the official website of Ningbo Konger Machinery Co., Ltd. The Konger official website currently offers 136 injection molding machine models, covering the full range including color-mixing machines, two-color mixing machines, three-color mixing machines, clear two-color machines, standard machines, fruit basket machines, PET machines and no-drying machines. Each model is marked with core parameters such as clamping force, injection volume, screw diameter and tie-bar spacing. The video will guide you step by step through the machine selection function...