PET IMM Series - Ningbo Konger Machinery - Two-Color Injection Molding Machine Expert

Model Matching

Chameleon Series

Phoenix Series

K-TEC Series

PET IMM Series

Crate Series

Bakelite Series

No-Drying Series

TEC_C Series

Konger PET Packaging IMM

High-Speed Precision Mass Production: 200mm/s injection speed, 8–12s PET preform cycle, 35%+ efficiency boost. 24h operation (12,000–18,000 pcs/day), auto picker for unattended production & labor cost reduction.
Intelligent Fresh-Keeping & High Quality: Precision temp/pressure closed-loop system, ±0.02mm neck accuracy. ≤0.5% package oxygen content, ≥92% transmittance, no defects, meeting high-end packaging needs.
Customized Flexible Adaptation: PET-specific screw (L/D 25:1) for PET/PETG. 3-minute mold change, compatible with transparent/frosted/colored PET products, suitable for small-batch multi-variety production.
Energy-Saving Stable & Easy Maintenance: Full-servo system saves 30%–40% energy. Wear-resistant core parts extend service life by 1.5x, 25% lower failure rate with intelligent fault diagnosis.
Full-Spec Wide Adaptability: Clamping force 230–650T, injection weight 527–2516g. Fits food/beauty/daily necessities packaging, for mass & customized production.

Customization Available Technical Support After-sales Service

Konger High-speed PET Preform IMM

Ultra-High Speed Production: 220mm/s injection speed, 1.8s dry cycle. 500ml preform cycle 6–10s, 27%+ higher productivity (15,000–20,000 pcs/day).
High-End Precision Quality: PET screw (L/D 28:1), AA ≤7ppm, preform transmittance ≥93%, neck precision ±0.01mm (food/medical grade).
Energy Saving & Low Cost: 30%–50% energy saving, ≤430kWh/ton material. 1.5× longer part life, 30% lower failure rate (smart diagnosis + remote O&M).
Flexible Easy Operation: 2-min quick mold change (48–96 cavities, 500ml–2L). Full automation with robot for 24h unattended production.
Full-Spec Adaptability: Clamping force 170–650T, injection weight 418–4633g (food/beverage preform mass/custom production).

Customization Available Technical Support After-sales Service

Konger PET Preform IMM

Ultra-High Speed & High Capacity: Full-servo direct drive and PET dual-cylinder injection, speed over 220mm/s, dry cycle 1.8s. 500ml preform cycle 6–10s, daily output 15,000–20,000 pcs, productivity up 27%+.
Precision Quality for High-End Use: Custom PET screw (L/D 28:1), 5-zone temperature control, AA below 7ppm. Preform transmittance over 93%, neck precision ±0.01mm, meeting food & medical standards.
Energy Saving & Low Cost: Full-servo + variable pump + nano heater save 30%–50% energy. Long-life parts, smart diagnosis, 30% lower failure rate, reducing O&M costs.
Flexible & Easy Operation: 2-minute quick mold change, 48–96 cavities, 500ml–2L bottles. Fully enclosed design, auto robot for 24h unattended production.
Full-Spec & Wide Adaptability: Clamping force 170–650T, injection weight 418–4633g. Covers food & beverage preform production for mass and customized manufacturing.

Customization Available Technical Support After-sales Service