Industry News
Ningbo Konger Machinery has made another breakthrough in the research and development of core technology of injection molding machines, and its self-developed drying-free dehumidification screw technology has won patent certification, and the Genie K-TEC and Chameleon series models have been upgraded and optimized, and energy saving and molding accuracy have been further improved. The full range of models has been implemented in mass production cases in six major industries, continuing to empower green and efficient production in the manufacturing industry
Complete Guide to Causes and Solutions for White Spots (Unmelted Particles) at Injection Molding Gates
In injection molding production, the appearance of unmelted resin particles (white spots) near the gate is a frequent defect that seriously...。
Guide to Solving Burn Defects in Injection Molded Products | Konger Helps Enterprises Reduce Rejection Rate
It not only severely impairs the product s aesthetic quality and structural performance but also leads to higher rejection rates, raw material wast.
Cracking, Partial Fracture and Easy Breakage on Plastic Product Surfaces Detailed Cause Analysis + Improvement Solutions
I,Detailed Cause Analysis 1.
Causes and Solutions for Bubble Defects in Injection Molded Products
It aims to provide customers with professional and practical guidance on troubleshooting and resolving bubble defects in injection molded products.
Cause Analysis and Solutions for Discoloration, Scorching and Raw Material Degradation of Products in Injection Molding Process
The core causes and practical countermeasures are summarized below to help troubleshoot and solve problems quic ly,Main Causes A.
Cause Analysis and Improvement Measures for Torsion and Twisting Deformation of Products During Injection Molding
During the enterprise injection molding production process, torsion or twisting of products after ejection is a common quality defect of pl...。
Summary of Causes and Practical Solutions for Flash (Burr/Excess Material) on Injection Molded Products
Flash (also nown as burr or excess material) is one of the common surface defects in injection molding production. Its main cause is: molten plast...。
Causes and On-Site Solutions for Ejector Whitening (Ejector Pin Whitening) in Injection Moldin
During injection molding production, ejector whitening (also nown as ejector pin whitening mar ) is a common surface defect. It appears as whitish...。
What Effects Can Konger's CMS (Color Mixing System) Achieve
II. Core Machine Model Classification: CMS two-color mixing is the classic basic model, adopting an A+B dual-injection-unit configuration to meet mainstream two-color mixing needs with broad applicability; CMS-3Color three-color mixing is the brand's flagship model, capable of naturally interweaving three colors simultaneously, with a high technical barrier and few domestic manufacturers capable of stable mass production. With strong mold compatibility, it does not require complex rotary-plate molds like the clear two-color process, offering more flexible mold requirements and lower...
Ningbo Konger Machinery: Two-Color Gradient Injection Molding Process, Redefining a New Benchmark for High-End Plastic Products
As a high-tech enterprise focused on the R&D, production and service of specialized injection molding machines, Konger, relying on nearly 30 specialized machine models and multiple patented technologies published on its official website, is driving two-color gradient injection molding from "high-end customization" to "large-scale popularization". 1. Significantly improved production efficiency: the equipment adopts modular design and multi-function synchronous operation logic, and the mold opening/closing, injection, cooling and part removal processes are optimized in parallel, shortening the production cycle by 20%-30% compared with traditional processes.