Konger CMS170 Special Two‑color Injection Molding Machine for Artificial Flowers. 

Custom‑built for artificial plant industry. Stable mass production for 8‑cavity simulation leaf molding. 

Optimized for thin‑wall multi‑cavity condition, eliminates flash & leakage issues on conventional machines. 

Realistic product texture, shorter cycle time and higher productivity. Suitable for petals, leaves, flower holders, supporting large‑volume domestic & overseas orders.

Ningbo Konger Machinery specializes in the R&D and manufacturing of dedicated injection molding machines for artificial flowers.

This video presents a real‑world production case of hydrangea 27‑fork flower holder: 4‑cavity mold, stable cycle time of 10.89 seconds, capable of 24‑hour non‑stop mass production.

Konger’s artificial‑flower‑specific injection machines are specially optimized for high‑volume production conditions of thin‑wall, small‑size, multi‑cavity artificial flower components. It features fast injection response and excellent part consistency, mitigating defects such as short shot, deformation and flash to keep reject rates under effective control.

The servo‑driven system balances production efficiency and energy consumption. Robust and reliable in operation, the machine fits various artificial flower parts including flower holders, petals and stems. Custom mono‑color and two‑color models are available to deliver dependable equipment solutions for large‑scale artificial flower factories.

Feel free to contact us for machine proposals.

Konger CMS170 color mixing injection molding machine for gradient artificial flower stamens.

Finished in one complete molding cycle with seamless natural color transition. No secondary assembly, painting or gluing required.

Equipped with dual independent injection units and precise servo control to stabilize gradient molding effect. Different from traditional post-spraying process, it avoids color fading defects and cuts labor cost.

Tailor-made for artificial flower & plant industry. Standard single-color mold can be adapted to produce gradient parts, saving expensive rotary two-color mold investment. Compatible with PP, PE virgin and recycled materials.

Suitable for mass production of stamens, petals, leaves and all kinds of two-color artificial floral plastic parts, helping manufacturers develop high-end differentiated artificial flower products.

DM us for machine specifications and turnkey solutions!

Plastic accessories for the artificial flower and plant industry generally share common production characteristics: thin-wall grids, small-component high-cavity mass production, and compatibility with PP/PE recycled materials. Traditional general-purpose injection molding machines often struggle to balance molding stability and production cost efficiency.

Based on years of experience in injection equipment R&D, Konger has developed a dedicated injection molding machine tailored for the artificial flower and plant industry. It is highly suitable for molding plastic accessories such as flower trays, petals, leaves, flower stems and other artificial plant components. This machine is equipped with an industry-customized screw and an optimized hydraulic response system, making it ideal for high-speed production with high-cavity molds such as 20-cavity flower tray molds. The plasticizing unit is optimized for PE and PP recycled materials, effectively solving common molding challenges such as insufficient filling of thin-wall parts, product warpage and poor weld lines. The clamping structure features enhanced rigidity, stable cycle performance and low failure rate during continuous mass production, which significantly reduces material waste and maintenance costs. It is an excellent molding solution for large-scale production in artificial flower factories. Widely applicable to the injection molding of plastic flower trays, artificial leaves, flower cores, sprues and various other artificial plant plastic accessories.

Konger TEC170CII servo injection molding machine delivers customized molding solutions for the artificial flower industry. Below is the on-site mass production of plastic artificial flower receptacles.
The machine is compatible with soft plastic materials such as PE and PP. Optimized injection and clamping parameters are specially designed for the thin rib features and irregular thin-wall structures of flower receptacles, effectively solving common industry defects including short shots, broken ribs, sink marks and warpage on tiny plastic parts. The finished receptacles feature clear texture and excellent toughness, and are crack-resistant when bent, fully meeting the mass production standards for artificial flower and plant accessories.
Equipped with a full closed-loop servo power system, the TEC170CII offers precise clamping and a wide adjustable range of injection speed. It supports high-volume production of small accessories like flower receptacles, petals and stems with multi-cavity molds, and is also applicable to medium and large-sized artificial flower plastic parts. Compared with conventional hydraulic machines, its servo energy-saving design cuts down unit production cost. The equipment runs stably with low failure rates during long-term continuous operation, making it an ideal upgrade choice for artificial flower manufacturers.
As an original R&D and manufacturer of injection molding equipment, Konger can customize machine parameters and molding processes dedicated to artificial flower production according to customers’ mold cavity quantity, plastic materials and product specifications. We provide one-stop services including pre-production mold testing, equipment installation & commissioning and after-sales maintenance, helping flower product manufacturers raise yield rate and reduce energy consumption.

Ningbo Konger Machinery Co., Ltd. is a professional manufacturer of injection molding machines dedicated to artificial flowers and plants. With years of experience in the injection machinery industry, we take market demand as the guide and technological innovation as the core, focusing on the R&D and manufacturing of specialized equipment for artificial flower and plant sectors.
Tailored to the production process characteristics of artificial flower accessories, we have developed two dedicated injection molding machine series: TEC140-TEC230 Special Injection Molding Machines for Artificial Flower Accessories and CMS140-CMS230 Two-color Injection Molding Machines for Artificial Plants. Optimized specifically for thin-wall precision parts such as petals, leaves, flower stems and stamens, our machines feature high molding precision, burr-free finished products, outstanding stability, energy efficiency and high productivity. We provide one-stop professional injection molding solutions for manufacturers of all types of artificial plants, effectively enhancing product simulation effect and mass production efficiency, and helping factories cut costs and boost profits. They are highly compatible specialized injection molding equipment for the artificial flower industry.
As quality requirements in the artificial flower and plant market keep rising, thin-walled, miniature and refined plastic accessories have become the mainstream products. Conventional universal injection molding machines have limited performance in molding small and thin parts, frequently causing defects such as short shot, sink mark, burr, deformation and rough surface. They suffer from low yield rate and high energy consumption, failing to meet the demands for mass production of high-quality artificial flower accessories.
Drawing on our rich experience in injection equipment R&D, Ningbo Konger has carried out comprehensive and targeted optimizations on clamping structure, injection system, screw plasticization, as well as pressure and speed control according to the properties of artificial flower and plant products. The TEC single-color series ensures stable mass production of various artificial flower accessories, while the CMS two-color series easily realizes high-end visual effects including two-color gradient and layered coloring. Our product lines fully cover the production of regular single-color parts and high-end two-color artificial plants, making them the ideal choice for equipment upgrading of artificial plant manufacturers.

The artificial flower market boasts a full production and sales chain spanning flower stems, receptacles and petals. Well-coordinated industrial links and mature systems fuel the vigorous development of the sector. Konger Machinery Co., Ltd. independently developed TEC CII equipment, which is gaining solid traction in the artificial flower industry. Delivering superior performance, it elevates product quality and production efficiency, drives industrial high-quality growth, witnesses the meticulous craftsmanship behind every artificial flower, and jointly embraces a promising industrial future.