Konger High-speed PET Preform IMM

• Ultra-High Speed Production: 220mm/s injection speed, 1.8s dry cycle. 500ml preform cycle 6–10s, 27%+ higher productivity (15,000–20,000 pcs/day).
• High-End Precision Quality: PET screw (L/D 28:1), AA ≤7ppm, preform transmittance ≥93%, neck precision ±0.01mm (food/medical grade).
• Energy Saving & Low Cost: 30%–50% energy saving, ≤430kWh/ton material. 1.5× longer part life, 30% lower failure rate (smart diagnosis + remote O&M).
• Flexible Easy Operation: 2-min quick mold change (48–96 cavities, 500ml–2L). Full automation with robot for 24h unattended production.
• Full-Spec Adaptability: Clamping force 170–650T, injection weight 418–4633g (food/beverage preform mass/custom production).

Konger PET Preform IMM

• Ultra-High Speed & High Capacity: Full-servo direct drive and PET dual-cylinder injection, speed over 220mm/s, dry cycle 1.8s. 500ml preform cycle 6–10s, daily output 15,000–20,000 pcs, productivity up 27%+.
• Precision Quality for High-End Use: Custom PET screw (L/D 28:1), 5-zone temperature control, AA below 7ppm. Preform transmittance over 93%, neck precision ±0.01mm, meeting food & medical standards.
• Energy Saving & Low Cost: Full-servo + variable pump + nano heater save 30%–50% energy. Long-life parts, smart diagnosis, 30% lower failure rate, reducing O&M costs.
• Flexible & Easy Operation: 2-minute quick mold change, 48–96 cavities, 500ml–2L bottles. Fully enclosed design, auto robot for 24h unattended production.
• Full-Spec & Wide Adaptability: Clamping force 170–650T, injection weight 418–4633g. Covers food & beverage preform production for mass and customized manufacturing.

Konger K-Tec series IMM

• High-Speed Precision Molding: 150mm/s injection speed, full closed-loop control, defect-free high-consistency products (daily/auto/3C/medical/packaging).
• Full-Scenario Adaptability: Clamping force 100–1400T, injection weight 148–10158g, fits small-to-large automotive/industrial parts.
• Stable & Easy Maintenance: Wear-resistant tie-bars, auto centralized lubrication, welding-free piping, extended service life & reduced downtime.
• Intelligent Efficient Control: Dedicated controller, rotatable multi-language touch screen, multi-machine monitoring & WEB-based production management.
• Strong Material Adaptability: Optimized screw + low-speed high-torque motor, excellent plasticizing for diverse plastic materials.

Konger PHOENIX/ES Electro IMM

• Ultra-precise Full-Electric Injection: Driven by multi-axis servo motors with high-precision ball screws and linear guides, positioning accuracy reaches ±0.01mm, repeatability ≤0.005mm. Equipped with force sensors and PID temperature control, it ensures high consistency for micro precision parts.
• Energy-saving, Clean & High-end Adaptable: Oil-free full-electric design eliminates leakage and contamination, meeting medical and food standards. Saves 40%–60% energy, reduces standby power by over 80%, with noise below 65dB.
• Stable, Efficient & Excellent Plasticizing: Screw-plunger hybrid structure ensures high-quality plasticizing for various materials, avoiding defects. Centralized lubrication and wear-resistant parts lower failure rate by 35% and extend service life by 1.5 times.
• Intelligent, Convenient & Flexible Production: Imported multi-axis controller stores 100+ process recipes for fast changeover. Supports one-operator multi-machine management and multi-variety small-batch production.
• Full-spec Coverage & Wide Adaptability: Clamping force 120–320T, injection weight 59g–694g. Widely applied in cosmetic, electronics, toys, stationery and precision components manufacturing.

Konger PHOENIX/PE Single-Cylinder Electric Pre-Plasticizing

• High Efficiency & Energy Saving: Single-cylinder electric plasticizing, screw speed up 15%–40%. Saves ≥35% energy, cuts standby power by 80%.
• Precision Closed-Loop: Injection accuracy ≤0.3%, weight repeatability ≤0.2%. PID temp control avoids defects, ensures uniform precision components.
• Stable & Durable: 15% less floor space, 50% higher rigidity. 35% lower failure rate, 1.5× longer service life, minimal maintenance cost.
• Flexible Application: Clamping force 120–320T, injection weight 59–860g. Fits cosmetic/cable tie/toy/pen sleeve production (standard/precision).
• Dual-Mode Adaptation: Full-electric ball screw boosts speed to 300–1000mm/s, switchable precision/efficiency modes.

Konger PHOENIX/P Single-cylinder rapid IMM

• Ultra-high Speed & Efficiency: 150mm/s injection speed, 30%+ higher efficiency, doubled production capacity.
• High Precision & Stability: Low reject rate, high batch consistency, meets precision part production standards.
• User-friendly & Flexible: Easy-to-master panel, clamping force 120–320T, injection weight 59–860g (cosmetic/toy/stationery).
• Energy Saving & Durable: Low-power hardware, wear-resistant core parts, low long-term operating costs.
• Dual-mode Adaptability: Full-electric ball screw (150mm/s), switchable for precision/efficiency scenarios.

Konger Mixed Two-color IMM

• Dual Configurations: All models with A/B dual configurations, balancing productivity & precision for flexible injection needs.
• Wide Adaptability: Clamping force 140–700T, injection volume 175–3030g, covering small-to-large product production.
• High Efficiency & Stability: 160Bar constant hydraulic pressure, precise injection rate, boosting efficiency & qualification rate.
• Broad Compatibility: Mold height 160–960mm, adjustable tie-bar distance, fit for complex molds & multi-industry use.
• Konger CMS Series: Parallel dual injection + single-nozzle design, 4 molding modes (mix/gradient/single/sandwich), one-step molding, cost-saving.
• True Sandwich Process: Dual-barrel control saves ≥25% material cost, improves strength ≥12%, solves bonding/overflow issues.
• Two-Color Gradient/Mixing: Dynamic color mixing, real-time ratio adjustment, one-step natural gradient/patterns (no secondary processing).
• High Precision & Efficiency: Servo-driven, 30% shorter cycle vs traditional processes, cutting labor/time costs.
• Dual-Function Machine: Free two-color/single-color switching, fit for standard molds, improving equipment ROI for small-batch orders.

Konger Non-mixing Dual-Color IMM

• Excellent molding effect: The 180-degree rotary table dual injection unit structure achieves clear boundaries and one-step integral molding of two-color/material products, completely solving the pain points of traditional processes such as secondary assembly, complex molds, and unstable color difference.
• Wide adaptability: Covering the full specification range of clamping force 150-850T and injection weight 98g/128g-402g/486g, it meets the production needs of two-color multi-cavity and large-scale two-color molds in automotive, 3C, medical and other industries, and is compatible with different viscosity raw material combinations such as hard rubber + soft rubber and new material + new material.
• Efficient cost reduction: Color and material change time is shortened by 50%, product changeover efficiency is increased by 40%, energy saving is 30%-50% compared with traditional fixed-displacement pumps. Universal wearing parts reduce inventory and whole-life cycle maintenance costs, and it can also be connected to automated equipment to achieve unmanned mass production.
• Stable and reliable: The entire system features precise material and temperature control, upgraded wear-resistant components, low-noise and constant-temperature operation, self-diagnosis of faults + multiple safety interlocks, which greatly reduces the risks of downtime and mold damage.