Konger No-pre-drying Material IMM
- No Pre-Drying, High Efficiency & Cost Reduction: Adopts 3rd‑generation patented dehumidifying screw and barrel temperature control. Removes moisture and volatiles during plasticizing. Eliminates drying equipment and pre‑drying, cutting investment by 30% and energy consumption by 20%. Prevents material agglomeration and discoloration; improves efficiency by over 25% vs traditional processes.
- Eliminate Molding Defects: Top vent, anti‑overflow seal and optimized screw compression ratio effectively remove moisture, air and volatiles. Solves flow marks, burn marks, silver streaks and bubbles. Enhances surface finish and density, meeting high‑end product requirements without secondary treatment.
- Energy Saving, Stable & Easy Maintenance: Full servo closed‑loop system with premium hydraulic parts saves 30%–45% energy vs fixed displacement pumps. High‑efficiency barrel insulation reduces heat loss by 15%. Standard wearing parts lower costs; operating noise ≤72dB.
- Wide Material Adaptability & Flexible Production: Compatible with ABS, PA, PC, PBT, PET and other hygroscopic plastics. Supports single‑color / multi‑material mode switching without mold modification. 100 sets of recipe storage, improves debugging efficiency by 40%.
- Full‑Specification Coverage: Clamping force 120–500T, injection weight 156g–1568g, mold height 160–830mm, injection rate 93–384cm³/s. Suitable for precision parts to large products and multi‑industry mass production.
简体中文
